FUTABA T18SZ Instruction Manual page 121

Conditions List
1. Tap the [Copy] button. The Copy screen
appears.
2. Select the condition by tapping the button
of the copy source conditions.
3. Next, select the condition by tapping the
copy destination condition.
4. Tap the [Copy] button.
5. When the [Yes] button is tapped, the data
is copied. (To abort copying, tap the [No]
button.)
Last condition has
the highest priority
1. Tap the condition whose
priority you want to change
in Conditions List.
2. Change the priority with the
priority [ ] or [ ] button. (The
last condition has the highest
priority.)
*The initial setting condition
cannot be moved. It has the
lowest priority.
Currently selected condition name
The ON/OFF switch of
condition is chosen.
＜ Model menu (Common Functions) ＞
1 . S e l e c t t h e c o n d i t i o n b y
tapping the condition you
want to reset in Conditions
List.
2. Tap the [Remove] button.
3. When the [Yes] button is
t a p p e d , t h e c o n d i t i o n i s
reset. (To abort resetting, tap
the [No] button.)
● Group/single mode switching (Gr./Sngl)
(For a description of the operation
method, see the description at the
back of this manual.)
1. Switch to the condition you want to set.
2. Tap the Delay button of the channel you
want to set.
3. Use the value input buttons to set the delay.
Initial value: 0
Adjustment range: 0~27 (maximum delay)
121