FUTABA T18SZ Instruction Manual page 104

Telemetry: Voltage [Ext. battery]
⇔
Tap the [Voltage] button in the Telemetry screen to
call the setup screen shown below.
Return to
Linkage menu
Max. and min. values
s i n c e t h e p o w e r
was turned ON will
display.
↓ The "down" arrow
will indicate that an
alarm will sound when
the voltage drops to
below the setting.
Alarm is chosen from
Buzzer, Voice, and
Inhibit.
The ON/OFF switch
of Speech is chosen.
Alarm set
1. Tap Alarm and choose from Bu er, Voice,
and Inhibit.
2. When not operating vibrator, it is "Vibrator" to
Inhibit. Type1-3 will be chosen if it is made to
operate.
3. Tap Limit [4.0V].
4. Adjust the rate by "
Initial value: 4.0V
Adjustment range: 0.0V~100.0V
5. To terminate the input and return to the
original state, push the HOME/EXIT button.
104 ＜ Linkage menu ＞
⇔
" " " " " " " button.
Di sp la yi ng dat a f ro m t he EXT
battery voltage port
*SBS-01V must be installed in the aircraft.
"Vibrator" type
If the following types are selected, the transmitter
will vibrate during the warning.
Type 1
Type 2
Type 3
Ext. battery
voltage
A setup of the
voltage on which the
alarm operates.