Sponge tape
② Stick the sponge
tape to the side of
the battery.
① A side battery cover
is opened.
Battery cover
FT2F2100B V2
LiFe Battery
③ Install the
battery into the
transmitter.
This 2P connector connects
to the transmitter.
The balance charge connector is not connected
when the battery is installed in the transmitter.
④ Connect the battery
connector.
⑤ Close the battery cover completely.
FT2F2100B V2
LiFe Battery
*This connector is used when charging with
the LBC-4E5, which is sold separately.
< Before Use >
19