FUTABA T18SZ Instruction Manual page 37

even with models that use a large number of servos. In addition, the wings can be quickly installed to the
fuselage without any erroneous wiring by the use of only one simple wire, even when there are a large
number of servos used.
S.BUS Glider usage example
HUB×4 ( Optional )
S.BUS Aerobatic plane usage example
Receiver: R7008SB
Servo: S3174SV×9 ( Optional )
Throttle servo: BLS173SV ( Optional )
Battery: FR2F1800 ( Optional )
Switch
Receiver: R7008SB
Aileron servo: BLS174SV×2 ( Optional )
HUB×3 ( Optional )
Rudder Servo: BLS175SV×1 ( Optional )
Elevator servo: BLS173SV×2 ( Optional )
＜ Before Use ＞
37