FUTABA T18SZ Instruction Manual page 114

Tap the [Trainer] button in the Linkage menu to call
the setup screen shown below.
Return to Linkage menu
When using at the student side
1. Select the mode.
"Teacher/Student": Select [Student].
"ACT/INH": Enable operation by changing to
[ACT].
"16/12/8 CH": When the student uses the
T18SZ,T14SG,T18MZ, select [16CH]. When the
student uses the T14MZ, T12Z, T12FG or FX-40,
select [12CH]. Otherwise select [8CH].
Note: In "student mode", only the teacher
side can turn on and off the power to the
student's transmitter. Keep the power switch
always at off position.
114 ＜ Linkage menu ＞
When using at the teacher side
1. Select the mode.
"Teacher/Student": Select [Teacher].
"ACT/INH": Enable operation by changing to
[OFF] or [ON].
"16/12/8 CHANNEL": When the student uses
the T18SZ (including the T18MZ, T14SG)select
[16CH]. Otherwise select [12CH]or[8CH].
2. Select the trainer switch.
Note: The trainer function won t be turned
on unless the Instructor's transmitter receives
signals from the student's transmitter. Be
sure to confirm this after connecting your
trainer cable.