FUTABA T18SZ Instruction Manual page 95

Sensor : Change slot
Call page 3/3 from the [Sensor] menu.
Return to
Linkage menu
Tap the [Change slot] button
in the Sensor screen to call the
setup screen shown below.
Sensor slot change
1. Connect the sensor to the T18SZ as shown in
the gure above.
2. Tap Change slot
Sensor screen.
3. Tap Read .
4. A sensor details screen appears.
5. The current start slot is displayed. To change
a start slot, a ＋
set to a slot that cannot be allocated like the
table of all pages.）
6. Tap to the Write .
on page 3/3 of the
button, tap.（Cannot be
This page is set when using multiple telemetry sensors
of the same type.
WARNING
Do not disconnect or turn transmitter
power OFF while telemetry sensor
data is being saved.
■Sensor save data will be lost, resulting in
malfunction.
＜ Linkage menu ＞ 95