Swash Ring (Alleen Heli) - FUTABA T8FG Series Manual

SWASH RING
linkage by simultaneous operation of the ailerons
and elevators. It is very useful in 3D aerobatics
menu and access the setup screen
shown below by touching the RTN
button.
and return to the Linkage
menu by touching the
RTN button.
The vertical direction shows the
e l e v a t o r t r a v e l . T h e h o r i z o n t a l
direction shows the aileron travel.
1. Activate the function:
Move the cursor to the [ACT] item and touch
the RTN button to switch to the data input
mode.
Select the ACT mode by scrolling the touch
sensor.
*The display blinks.
Touch the RTN button to activate the
function and return to the cursor mode.
2. Rate setting:
Move the cursor to the [RATE] item touch the
RTN button to switch to the data input mode.
Set the rate by scrolling the touch sensor.
reset to the initial value.
Touch the RTN button to end adjustment and
return to the cursor mode.
64
* niet vertaald *
a circle is displayed in the operating
range display area and the rate input box
is displayed. Stick operation is limited to
the area of this circle.
stick position.
<SensorTouch™>
Scrolling