FUTABA T18SZ Instruction Manual page 77

Function
Tap the [Function] button in the Linkage menu
to call the setup screen shown below.
Return to
Linkage menu
Function change
1. Tap the function button of the channel you
want to change to call the Function select.
2. Select the function you want to change.
Channel assignment for each function can be changed to suit your needs.
DG1, DG2 (switch channels)
Channel restrictions by a System Type
Operation control change
1. Tap the control button of the channel you
want to change. A control select screen
(stick, switch, knob, trim lever, etc.) is
displayed.
2. Select the control you want to operate.
＜ Linkage menu ＞ 77