Telemetry : Temperature - FUTABA T18SZ Instruction Manual

Telemetry : Temperature

Tap the [Temperature] button in the Telemetry
screen to call the setup screen shown below.
Return to
Linkage menu
Max. and min. values
s i n c e t h e p o w e r
was turned ON will
display.
↑ An upward arrow
w i l l s h o w t h a t a n
alarm will sound when
the temperature rises
above the set value.
↓ A downward arrow
w i l l s h o w t h a t a n
alarm will sound when
the temperature drops
below the set value.
Alarm is chosen from
Buzzer, Voice, and
Inhibit.
The ON/OFF switch
of Speech is chosen.
Alert set : Temperature warning
1. Tap Alarm and choose from Bu er, Voice,
and Inhibit.
2. When not operating vibrator, it is "Vibrator" to
Inhibit. Type1-3 will be chosen if it is made to
operate.
3. Tap to the Limit [℃ ] item .
4. Adjust the rate by "
Initial value: 100℃ 0℃
Adjustment range: -20℃ ~200℃
( Limit ≧ Limit)
5. To terminate the input and return to the
original state, push the HOME/EXIT button.
*A temperature sensor must be installed in the aircraft.
" " " " " " " button.
Displaying data from the temperature
"Vibrator" type
If the following types are selected, the transmitter
will vibrate during the warning.
Type 1
Type 2
Type 3
＜ Linkage menu ＞
Temperature
A setup of the
temperature on which
the alarm operates.
99