Table of Contents
Advertisement
Table 1: CP6005(X)-SA Main Specifications (Continued)
FEATURES
Onboard Connectors
Front Panel LEDs
DIP Switches
Reset Switch
Hot Swap Switch
Real-Time Clock
Watchdog Timer
System Timer
IPMI Controller
www.kontron.com
» One XMC connector, J19 (P15)
» Two SATA connectors
» One 7-pin, standard SATA connector, J14
» One 34-pin, SATA extension connector, J16
» One JTAG connector, J15
» One XDP-SFF (debug) connector, J25
» Four CompactPCI connectors J1, J2, J3 and J5
» Two ZDplus high-speed serial rear I/O connectors, J4 and J41 (PICMG 2.20)
(CP6005X-SA)
» Two 204-pin DDR3L SODIMM sockets, J17 and J18
IPMI LEDs:
» I0/I1 (red/green):
System Status LEDs:
» WD (green):
» TH (red/green):
» HS (blue):
General Purpose LEDs:
» LED3–0 (red/green/amber):
Ethernet LEDs:
» ACT (green):
» SPEED (green/orange):
Two onboard DIP switches, SW1 and SW2 for board conf iguration on the rear side
of the board
One hardware reset switch on the front panel
One switch for hot swap purposes integrated in the front panel in accordance
with PICMG 2.1 Rev. 2.0
Real-time clock with 256 Byte CMOS RAM; battery-backup available
Sof tware-conf igurable, two-stage Watchdog with programmable timeout ranging
from 125 ms to 4096 s in 16 steps
Ser ves for generating IRQ or hardware reset
The Intel® QM87 Chipset contains three 8254-style counters with f ixed uses.
In addition to the three 8254-style counters, the Intel® QM87 Chipset includes
eight individual high-precision event timers that may be used by the operating
system. They are implemented as a single counter each with its own comparator
and value register.
NXP® ARM7 microcontroller with 512 kB f irmware flash and automatic rollback
strategy
The IPMI controller carries out IPMI commands such as monitor ing several
onboard temperature conditions, board voltages and the power supply status,
and managing hot swap operations.
The IPMI controller is accessible via two IPMBs, one host Keyboard Controller
Style (KCS) Interface and up to four Gigabit Ethernet Interfaces (IOL).
SPECIFICATIONS
Sof tware status of the IPMI controller
Watchdog status
Temperature status
Hot swap status
General purpose / POST code
Network link / activity
Network speed
User Guide
CP6005(X)-SA
20
Advertisement
Table of Contents
