Get Control State (Spi Boot Flash Selection, Boot Order Selection) - Kontron CP6005-SA User Manual

10.5.4 Get Control State (SPI Boot Flash Selection, Boot Order Selection)

This command is used to read out the SPI boot flash and boot order settings.
Table 66: Get Control State
COMMAND
Get Control State (SPI Boot Flash, Boot Order)
Byte Data Field
1 Control ID:
00h = SPI boot flash selection
9Dh = uEFI BIOS boot order conf iguration
Byte Data Field
1 Completion code
4 Current control state (see section "Set Control State")
00h .. 01h for control ID = SPI boot flash selection
00h .. FFh for control ID = uEFI BIOS boot order conf iguration
www.kontron.com
LUN
00h
REQUEST DATA
RESPONSE DATA
User Guide
CP6005(X)-SA
NetFn CMD
OEM = 3Eh 21h
88