Table of Contents
Advertisement
10. 4 F i r mwa re I d e n t i f i c a t i o n
10.4.1 Get Device ID Command
Table 64: Get Device ID Command
COMMAND
Get Device ID
Byte
Data Field
--
--
Byte
Data Field
1
Completion code
2
10h
3
80h
4
02h
5
00h
6
51h
7
BDh or BFh
8..10
98h 3Ah 00h Manufacturer ID, LSB f irst
03A98h = 15000 = Kontron
11..12
00h B4h
B400h = Identif ies the board/family f irmware
13*
Release number of the IPMI f irmware (varies depending on f irmware revision):
10h for R10
11h for R11
14*
Board Geographical Address/slot number:
1 ... = Board in chassis slot 1...
15..16*
Reserved
* Bytes 13 through 16 are optional and defined by Kontron.
Invoking the IPMI command Get Device ID returns among other information the following data:
»
Manufacturer ID = 3A98h (Kontron IANA ID)
»
Product ID = B3C0h, identifies the board family of the IPMI firmware
»
Firmware revision (byte 4:5) reflects the version of the running firmware, which will change
after firmware update.
»
Release number of the IPMI firmware (byte 13) will be incremented with each firmware up-
date
www.kontron.com
REQUEST DATA
RESPONSE DATA
Device ID
Device Revision
Firmware Revision 1: Major Firmware Revision
(var ies depending on f irmware revision)
Firmware Revision 2: Minor Firmware Revision, BCD encoded
(var ies depending on f irmware revision)
IPMI Version, holds IPMI command specif ication version, BCD encoded
Additional Device Support (SMC or BMC mode)
Product ID, LSB f irst
LUN
NetFn
00h
App = 06h
User Guide
CP6005(X)-SA
CMD
01h
85
Advertisement
Table of Contents
