Table of Contents
Advertisement
7 SATA Flash Module
The CP6005(X)-SA provides an optional SATA Flash module with up to 64 GB NAND flash memory. The
SATA Flash module is connected to the CP6005(X)-SA via the board-to-board connectors J17 located
on the CP6005(X)-SA and J2 located on the SATA Flash module. The SATA Flash module has been opti-
mized for embedded systems providing high performance, reliability and security.
Note:
If the SATA Flash module is mounted on the CP6005(X)-SA, the MMADP-SATA01 module
cannot be used with the CP6005(X)-SA.
7.1 Te ch n i c a l S p e c i f i c a t i o n s
Table 53: SATA Flash Module Main Specifications
MMADP-SATA01
Board-to-Board
Connector
Memor y
Power Consumption
Temperature Range
Climatic Humidity
Dimensions
Board Weight
Note:
Write protection is available for this module. Contact Kontron for further assistance if
write protection is required.
7.2 S ATA F l a s h M o d u l e L ay o u t
Figure 13: SATA Flash Module Layout (Bottom View)
www.kontron.com
One 34-pin, male, board-to-board connector, J2, for connection to the
CP6005(X)-SA
Up to 64 GB SLC-based NAND flash memory
»
Built-in full hard disk emulation
»
Up to 100 MB/s read rate
»
Up to 90 MB/s write rate
typ. 1.0 W; 3.3 V supply
Operational:
0°C to +60°C
-40°C to +70°C
Storage:
-40°C to +85°C
93% RH at 40°C, non-condensing (acc. to IEC 60068-2-78)
70 mm x 28 mm
ca. 14 grams
NAND
Flash
NAND
Flash
J2
SPECIFICATIONS
Standard
Extended (on request)
User Guide
CP6005(X)-SA
65
Advertisement
Table of Contents
