Use The Polycom Desktop Connector - Polycom VVX 300 User Manual

Polycom VVX Business Media Phones User Guide
7 Select Save.
Your settings are saved and the Basic screen is displayed.
8 A message is displayed asking you to allow sharing with your computer. Select Yes.
9 A dialog box is displayed on your computer asking if you wish to allow remote control of your phone.
Click OK to complete the setup process.
The PDC icon turns red, shown next, indicating that you have successfully enabled the PDC
program.
Disable the Polycom Desktop Connector
If the PDC is enabled and you wish to disable it, you can use one of the following methods:
To disable the PDC:
» Do one of the following:

On your computer, right-click the PDC icon on your taskbar and click Exit.

On your phone, navigate to the PDC Configuration menu and set the Status to Disabled.
User Tip: Understand the PDC icon colors
When you enable the PDC program, the PDC icon turns red. When you disable the PDC
program, the PDC icon turns grey.

Use the Polycom Desktop Connector

After you've configured and enabled the PDC, you can use your computer mouse and keyboard to click
menus and enter text in the editable fields—the fields with a flashing cursor—on your phone.
To access your phone's screen using your mouse:
» Move your mouse pointer off the edge of your computer monitor in the direction of your phone—left
or right—that you indicated in the setup process.
The pointer leaves your computer monitor and appears on the phone's screen.
Polycom, Inc.
UC Software 5.3.0
171