Using A Mouse And Keyboard With Your Phone; Starting And Stopping Polycom Desktop Connector - Polycom VVX 500 User Manual

Using a Mouse and Keyboard with Your Phone

You can use your computer's mouse and keyboard to enter information and navigate screens on your
phone. For example, you can enter phone numbers, contact directory information, and select
touchscreen objects without using the phone's keypad or tapping the touchscreen. You can easily move
the mouse pointer back and forth between your computer and your phone depending on your task.
Before you can use your mouse and keyboard with your phone, you need to make sure the
Polycom Desktop Connector (PDC) application is installed and running on your computer. While the PDC
application is running, you can move your mouse pointer back and forth between your computer and
phone.
Web Info: Detailed Information About Setting Up, Enabling, and Using PDC
For more information about setting up and enabling the Polycom Desktop Connector, including
how to use it to navigate and enter information on your phone, see
with the Polycom Desktop Connector (Feature Profile

Starting and Stopping Polycom Desktop Connector

Before you can start using your mouse and keyboard with your phone, you'll need to start the PDC
application from your computer.
You can close the application at any time to prevent your mouse pointer from moving to the phone. If
you stop it, you can restart it again at any time.
To start Polycom Desktop Connector:
1 From the Start Menu, select Programs > Polycom > Polycom Desktop Connector.
After a few seconds, the Polycom Desktop Connector icon (shown next), displays in the
Windows system tray, and the message Allow remote control of device <MAC address of phone>
displays on the computer. This message displays only the first time the application is started.
2 Click OK.
This document is offered to you by www.telecomsupplier.com
Chapter 3: Using Advanced Features
Extend Your PC to Your Phone
52855).
85