Change Video Call Settings; Set The Call Rate For Video Calls; Stop Video For All Calls - Polycom VVX 300 User Manual

Polycom VVX Business Media Phones User Guide
Message
VVX Camera attached. Contact administrator to enable
video.
VVX Camera attached. Video available when next idle.
VVX Camera removed.
VVX Camera is not connected

Change Video Call Settings

When you update video settings, you change the way all video calls display on your VVX 500, 600, and
1500 phone. If you update settings during a call, the new settings apply to the next call and not the
current call.
You can update the following video settings on your phone:
●

Set the Call Rate for Video Calls

●

Stop Video for All Calls

●
Change Video Clarity
●
Change the Video Call and PIP Displays
Set the Call Rate for Video Calls
You can set the maximum bandwidth to use for a video call. The call rate you select applies to your next
video call. Your system administrator can set a maximum call rate for video calls. If your system
administrator sets a call rate limit, you cannot select a call rate above this limit.
To set the maximum call rate to use for video calls:
1 Select Settings > Basic > Call Rate.
For VVX 1500 phones, select Menu > Settings > Basic > Call Rate.
2 From the Call Rate screen, select the maximum call rate you want to use for video calls. You can
choose a call rate between 128 kbps and 768 kbps. The default setting is 512 kbps.
Stop Video for All Calls
You can stop your phone from automatically transmitting your video at the start of all calls by disabling the
Auto Start Video Tx setting. The default setting is enabled, which automatically transmits video at the start
of every call.
Polycom, Inc.
Action
Indicates that your camera is ready to use. However,
your phone isn't enabled to send and receive video.
See your system administrator.
Indicates that your camera is ready to use for your next
video call.
Indicates that you have detached your camera from
your phone.
Indicates that a VVX Camera is not attached to your
phone, but you are accessing a feature or function that
requires that the camera be attached.
UC Software 5.3.0
89