Swap Video; Handle Video And Audio Calls - Polycom VVX 300 User Manual

Polycom VVX Business Media Phones User Guide
To view video in full screen:
» Do one of the following:

Tap Video > Full Screen.

Tap .
To exit full screen view:
. If you don't see
» Tap

Swap Video

You can switch the locations of your video and the far-side video. If you do this, your PIP is displayed in
the call window, and the far-end video, previously displayed in the call window, is displayed in the PIP
location. When you swap video so that your video is displayed in the call window, rather than in the PIP,
the message "Local camera" is displayed next to your video, as shown next.
Swapped video screens
To swap where video is displayed:
» During a video call, do one of the following:

Tap Video > Swap.

Tap the PIP.

Handle Video and Audio Calls

When you have multiple calls, you can easily manage a video call from the Calls screen. In the Calls
screen on VVX 500 and 600 phones, you can identify the video call by the video stream that is displayed
next to the call's details. On VVX 1500 phones, the active video call is displayed on the Home screen,
and all held calls display above the soft keys.
Polycom, Inc.
, press your finger at the bottom of the screen until it is displayed.
UC Software 5.3.0
96