Polycom VVX 300 User Manual page 40

Polycom VVX Business Media Phones User Guide
The New Call screen is displayed.
2 Enter a number or select a contact.
3 Select Dial, or on VVX 500 and 600 phones, tap
The phone plays a tone and the call is answered automatically on the contact's phone.
4 Speak your message and wait for a reply.
5 If you do not need to wait for a response, select End Call.
Note: Quickly call a contact using the intercom
You system administrator can set up your phone to automatically call a specific contact when
you press the Intercom soft key. If your phone is set up this way, press the Intercom soft key
and wait for the call to be answered before speaking your message.
You can also place an intercom call during a call.
To use the intercom during a call:
1 Select Hold, and select the Intercom soft key.
The active call is placed on hold and the New Call screen is displayed.
2 Enter a number or select a contact.
3 Select Dial, or on VVX 500 and 600 phones, tap
4 After the call is answered, speak your message and select End Call.
5 Select Resume.
If your phone is set up to answer intercom calls with your microphone muted, you need to unmute your
microphone before responding to the call.
To respond to an intercom call with mute enabled:
» After the call is answered, press the Mute key and reply.
Place a Call from a VVX Expansion Module
You can place a call using the line keys on your VVX Expansion Modules. Line keys on expansion
modules activate available lines and place calls to contacts assigned to those lines. See the section
Connect Polycom VVX Expansion Modules to Your Phone
modules.
To place a call:
» Do one of the following:

Press a line key corresponding to an available line and dial the number.

Press the line key of the assigned favorite you want to call.
The call is placed and is displayed on your phone's screen.
Polycom, Inc.
.
.
for more information on using expansion
UC Software 5.3.0
40