Use The Polycom Desktop Connector; Set Up And Enable The Polycom Desktop Connector - Polycom VVX 300 User Manual

Polycom VVX Business Media Phones User Guide
Timesaver: How to quickly connect and disconnect your headset
You can quickly disconnect your headset by turning your headset off. When you turn it off, the
message "Headset removed" displays. When you turn your headset back on, the headset is
connected again.
To remove your headset:
1 Navigate to Settings > Basic > Bluetooth Settings > Manage BT Headsets.
2 From the Manage BT Headsets screen, select your headset, and select Remove.
Your headset is removed from the list and is no longer paired or connected with your phone.

Use the Polycom Desktop Connector

The Polycom Desktop Connector (PDC) enables you to use your computer mouse and keyboard to
navigate and enter information on your phone. This feature is especially useful when you are working with
built-in applications such as the Web Browser (see
any language your phone and computer supports, including most Asian and Central European character
sets. Contact your system administrator to find out if your phone supports the PDC.
Before you can enable and use the PDC, you need to download the PDC program from the
Voice Applications website, install the application on your computer, and activate PDC on your phone.

Set Up and Enable the Polycom Desktop Connector

To enable the PDC, you need to enter your computer access credentials to the phone. You can provide
this information to your phone using one of two methods:
on how your phone and computer are set up.
After you install the software, you need to make changes to your phone to establish a connection to your
computer and provide an exception to your firewall or anti-virus software to unblock the PDC program.
Use the Direct Method
If your phone and computer are connected using an Ethernet cable, use the direct method to enable the
PDC. Using this method, your phone automatically detects your computer access credentials.
To connect using the direct method:
1 Run the PDC program on your computer by clicking Start > Programs > Polycom > Polycom
Desktop Connector.
Polycom, Inc.
Use the Web Browser). The PDC is compatible with
Direct or Indirect. The method you use depends
UC Software 5.2.0
Polycom
150