Cassette Parameters - AGFA SelectSet Avantra User Manual

Cassette Parameters

You can define up to five different sets of cassette parameters. If you
define and use cassette parameters, you can change a group of pa-
rameters on the SelectSet Avantra just by selecting a different cassette
number.
Consider this example:
A shop uses film in three different widths. Operators fre-
quently need to change among them. Cassette 1 is loaded
with 12 inch (305 mm), cassette 2 is loaded with 14 inch
(355 mm), and cassette 3 is loaded with 18 inch (458 mm)
film. When changing supply cassettes, the operator changes
the cassette number at the control panel. The imagesetter
reads the stored parameters from memory.
Consider these advantages:
• Save time by not having to key in a new set of parameters.
• Reduce the chances of operator error.
• Easy tracking of media remaining in a cassette.
Note: DualSupply cassettes and media punches
are extra-cost options. If an option is not installed,
the icon that governs the feature is grayed out.
Using the Control Panel • 3–19