Intake Filters - AGFA SelectSet Avantra User Manual

Intake Filters

Check both the Electronics Enclosure Intake filter and the Drum
Intake filter every day to make sure they are not blocked.
Figure 7.7.
Clean the Electronics Enclosure Intake filter. This filter is approxi-
mately / " (6 mm) and made of black plastic foam.
1
4
Interval: Weekly.
Method: Shut down the imagesetter. Pull out the filter and vacuum.
Replace the Drum Intake filter. This filter is approximately
thick and is made of several different layers.
Interval: Once a month or more frequently if necessary.
Method: Shut down the imagesetter. Pull out the filter and replace
it. Use part number C00305-001. Contact your service provider for
information about ordering replacement filters.
7–14 • SelectSet Avantra User Guide
—Electronics enclosure filter. —Drum intake filter.
/ " (19 mm)
3
4