Bridge Operating Sequence - AGFA SelectSet Avantra User Manual

Bridge Operating Sequence

Here is what happens when you use the bridge.
• The imagesetter cuts media as soon as possible after it has fed 10"
(25.4 cm) past the cutter.
• This minimum length can be made up of imaged jobs, unexposed
media feeds, or both.
• Cuts are made automatically when the imagesetter is idle.
• When the imagesetter advances media because a new job or feed
command has been sent by the RIP, it switches to the Pause Screen
and displays this animated icon.
• If a media feed pushes enough media past the cutter to enable a
cut, the Pause Screen remains on the control panel and this ani-
mated icon appears.
8–6 • SelectSet Avantra User Guide