Processor Replenishment; Automatic Replenishment - AGFA SelectSet Avantra User Manual

Processor Replenishment

Two kinds of replenishment automatically maintain the chemicals in
the tanks at optimum quality:
1. Automatic replenishment to keep the concentration of developer
and fixer at constant levels.
2. STDBY Replenishment.
In addition, the MAN REPL key allows you to replenish the chemicals
manually.

Automatic Replenishment

Automatic replenishment compensates for chemical exhaustion in the
following way:
The processor pumps 100 cc. of developer and fixer replenishment
chemicals into the tanks according to a calculation based on the pre-
set replenishment value, the area of the material, and the percentage
density as set on the control panel.
When presetting replenishment values (cc. / square meter), you must
refer to the information included on the material box and also the infor-
mation provided by the chemical manufacturer. When the material is
fed, the processor calculates its area (width x length).
B–8 • SelectSet Avantra User Guide