AGFA SelectSet Avantra User Manual page 178

Meaning:
Action:
Meaning:
Action:
Meaning:
Action:
Meaning:
Action:
9–30 • Avantra User Guide
Exit Jam
Material has entered the processor, but did not
reach the processor exit sensor in the given
amount of time. When the processor displays this
message, the imagesetter displays message 57,
Processor Error.
Check processor for possible media jam.
Motor Overload
The processor has detected an error in the trans-
port drive system. When the processor displays
this message, the imagesetter displays message
57, Processor Error.
Inspect the processor for possible media jam, dam-
aged gears, or binding drive system. Disconnect
and reconnect power to the OLP to clear the error.
If the error persists, call for service.
Door Open
The dryer compartment interlock is disengaged.
Close the dryer compartment door.
Manual Start
The manual start key on the control panel has
been activated.
As soon as the manual start key is pressed again,
the message will automatically be removed.