Load A Media Supply; Feed And Cut - AGFA SelectSet Avantra User Manual

Load a Media Supply

When you press Load, the imagesetter advances media from a supply
(Available only with DualSupply Option.)
cassette into the drum.
To Load a Supply:
Press once and the icon
flashes.

Feed and Cut

Press Feed and Cut to advance media out of the drum.
To Feed and Cut:
Press once and the icon
flashes.
To Unload:
The Output Mode that you specify in the Configuration Screen affects
Press once and the icon
the Feed and Cut function. Your choices for Output Mode are Take-up
flashes.
Cassette or On-line Processor.
When you use the on-line processor:
• Imaged media is fed past the cutter.
• The media is cut. The imagesetter ignores the Feed Cut Amount.
• The imagesetter feeds the cut media through the bridge to the pro-
cessor.
Load Supply A
Load Supply B
Press again to complete
loading or...
...press Abort to cancel.
Feed and Cut
Unload
Press again to complete
the feed and cut or...
...press Abort to cancel.
Press again to complete
unloading or...
...press Abort to cancel.
Using the Control Panel • 3–5