Set Up the Processor Option
Follow this procedure to set up the imagesetter to use the OLP.
1. Press Pause, Configuration, Output Mode.
2. Select the output mode:
Press Plus or Minus to select out-
put mode.
Choices:
Take-up cassette (left)
OLP (right)
Note: Make sure that you remove the take-up cas-
sette and that the bridge is completely lowered into
its operating position.
8–4 • SelectSet Avantra User Guide
The button shows the current output mode.
Take-up cassette selected.
OLP selected.
3. Accept or Cancel:
Press Accept to change
the output mode, or...
...press Cancel to discard.
Need help?
Do you have a question about the SelectSet Avantra and is the answer not in the manual?