AGFA SelectSet Avantra User Manual page 106

14 RIP Data Error
The RIP sent more data than it specified.
Reset. Process the job that generated the error. Make sure
that it is complete. If the error persists, call for service.
15 No RIP
Check to see if your RIP is running. Check cable connec-
tions between RIP and imagesetter.
Reset. If the error persists, call for service.
17 Spinner Speed Error
Hardware error.
Reset. If the error persists, call for service.
22 Spot Aperture Jam
The device that adjusts the laser spot size is jammed.
Reset. If the error persists, call for service.
23 Boot Diagnostic Error
Hardware error detected while attempting to boot.
Reset. If the error persists, call for service.
25 Carriage Switch Broken
Hardware error.
Reset. If the error persists, call for service.
Diagnostics and Error Messages • 6–5