Error Messages - AGFA SelectSet Avantra User Manual

Error Messages

This section lists the error codes and describes corrective action.
1 Carriage Jam
Motion of the carriage has been blocked.
Reset the imagesetter and retry the original operation. If
the error returns immediately, the carriage may be getting
caught on media in the drum. See the section Unload
Media Using the Utility Screen in this chapter.
3 Cutter Jam
The power cutter is jammed.
Retry the cut operation. If the error persists, call for ser-
vice.
4 Out of Media
The supply cassette is empty.
Load media into the supply cassette.
You may find up to 12" (30.5 cm) of media extending out
of the take-up cassette when you remove it after an Out
of Media error message.
5 No Take-up Cassette
The take-up cassette is not in place or is not seated cor-
rectly.
Put in the take-up cassette. If the cassette is in the media
compartment, make sure that it is seated correctly.
Diagnostics and Error Messages • 6–3