Boot Errors - AGFA SelectSet Avantra User Manual

Boot Errors

The SelectSet Avantra runs a diagnostic program as it boots up. If the
diagnostic program detects an error:
• When the internal modem is connected, the imagesetter automati-
cally dials out to the remote diagnostic unit.
• When the internal modem is not connected, the error icon remains
on the control panel.
• In either case, the imagesetter will not complete its bootup.
Note: If your modem is not connected, write down
the error message and call your service represen-
tative.
Boot errors are described as either fatal or nonfatal.
• Fatal errors make it impossible for the system to boot until some
kind of service is performed to correct the problem.
• Nonfatal errors indicate a problem that needs to be corrected, but
will not keep the imagesetter from working.
6–18 • SelectSet Avantra User Guide