Punch Trays - AGFA SelectSet Avantra User Manual

Punch Trays

Check the punch trays every three months. Follow this procedure to
empty them.
Step 1: Turn off the imagesetter.
Step 2: Open the left side door.
Step 3: There are two punch trays, both below the imaging drum.
They are bright red. Slide the trays out of the imagesetter to
empty them.
Figure 7.8. The imagesetter with the left side door open.
Step 4: Replace the trays, close the left side door and start the
imagesetter.
—The punch trays.
Maintenance and Troubleshooting • 7–15