Scanning And Saving The Image - Minolta DIMAGE SCAN DUAL Manual

SCANNING AND SAVING THE IMAGE

When you have finished making all the desired adjustments to the image, you are ready to
scan the film.
1. Click on
• The cursor will change to an hourglass and a progress bar will appear.
• To cancel the scan, click on
Cancelling Operation message box appears.
Do not remove the film holder until the scan is finished.
Interfering with the scanner during scan could result in
image distortion.
2. Click on to exit the Dimâge Scan Dual
driver software. The image will be opened in
your photo application software.
• The driver window will automatically close after each scan if "Close
driver after scanning" was selected in the preferences dialog box.
3. Save the image using the instructions from
your photo application software.
4. Remove the film holder from the scanner.
34
.
or press the escape key until the