Advertisement
23(5$7,21
',PDJHV
'HVFULSWLRQ
0LUDJH
Although the Brightness Uniformity control can be used for a single image, it is
particularly useful for setting up and maintaining tiled images as a "seamless" display
wall in which the color cast and light output appear uniform throughout each image
as well as throughout the entire wall.
For best results, avoid "experimenting" with Brightness Uniformity controls—follow
the Achieving Brightness Uniformity procedure provided in 3.9, Using Multiple
Projectors.
6HUYLFH
The Service submenu is also accessed through the Advanced menu, but it is
password-protected and intended for use by qualified service technicians only.
6WDWXV
This read-only menu lists a variety of details about the standard and optional
components currently in use on the projector. Refer to the Status menu for versions of
hardware (left side) and software (right side) installed, the number of lamp hours
logged in total and for a specific period (such as a rental period), and for your
projector model name and serial number. In addition, the Status menu identifies the
current channel, switcher, slot and frequencies.
Use
,
A single projector can display 3D images as described below. Such images require a
specialized source as well as additional hardware and software in order to be
displayed and interpreted correctly in a typical 3D active stereo viewing
environment.
In simple terms, images generated from a 3D-video source consist of a series of
images (frames or fields) that alternate quickly between two slightly different
8VHU·V 0DQXDO
,
or
to see additional Status information.
)LJXUH 6WDWXV 0HQX 6$03/(
Advertisement
