Advertisement
23(5$7,21
0LUDJH
back on until it has been off for a few minutes. Hot re-strikes of the lamp may reduce
lamp life.
,QSXW
,QSXW
,QSXW
Press
This is the same as entering
,QSXW
,QSXW
Press
,QSXW
interface). This is the same as entering
,QSXW
,QSXW
Press
,QSXW
video). This is the same as entering
,QSXW
,QSXW
,QSXW
Press
is the same as entering
,QSXW
,QSXW
Press
,QSXW
switcher connected serially to the projector's switcher port. The first digit represents
the number you have assigned to your switcher (usually 1-9, or "0" for one of the
four inputs on the projector). The second digit represents the switcher's slot number
(1-9). For example:
,QSXW
NOTES: 1) Although you don't need to use the input key unless a switcher is
connected to the projector, you can also use
the projector itself: use
switcher), then
in combination with higher numbers is an invalid entry. 2) See 3.5, Using
Channels and Inputs for a detailed explanation of inputs.
,QSXW
NOTE:
Display Channel List option is selected in the Preferences menu. You can choose to
have on-screen feedback when you press
source location "blind", i.e., without on-screen feedback. See Preferences later in
this section.
&KDQQHO
&KDQ
Press
&KDQ
memory. Once you enter a 2-digit channel number (or, if there is a list displayed,
highlight it and press
according to the numerous setup parameters defined for that channel.
&KDQ
NOTE:
Display Channel List option is selected in the Preferences menu. You can choose to
use a scrollable list of channels when you press
desired channel number "blind", i.e., without on-screen feedback. See Preferences
later in this section.
8VHU·V 0DQXDO
to select the source connected to
,QSXW
to select the source connected to
to select the source connected to
to select the source connected to
,QSXW
.
when you want to display from a specific source location, such as a
= display data from switcher 1, slot 2.
as the first digit (representing the projector as the
,
,
, or
key behavior during a presentation depends on whether or not the
to select a specific source setup (channel) defined and stored in projector
(QWHU
), the display will automatically change and update
key behavior during a presentation depends on whether or not the
,1387
on the projector (data input).
.
,1387
on the projector (an optional
,QSXW
.
,1387
on the projector (composite
,QSXW
.
,1387
on the projector (S-Video). This
,QSXW
to access the four input "slots" on
as the second digit (the desired input slot number).
,QSXW
, or you may prefer to enter the desired
&KDQ
, or you may prefer to enter the
Advertisement
