Advertisement
237,21$/ ,1387 02'8/(6
'9, ')3 ,QSXW 0RGXOH
'LJLWDO +'79 ,QSXW 0RGXOH
[[
)
0LUDJH
The DVI/DFP Input Module can be installed in the projector to display digital video
input signals conforming to the DVI (Digital Visual Interface) standard (single-
channel) or the DFP (Digital Flat Panel Port) specification.
)HDWXUHV
¡
Supports Digital Visual Interface (DVI) single-channel and Digital Flat
Panel Port (DFP) standards
¡
Supports VESA
¡
Provides an active-loop-through using a 20-pin MDR connector
(conforming to DFP Specifications)
The Digital HDTV Input Module can be installed in the projector at
accepts a digital 4:2:2 component HDTV signal (YCbCr) via a single
connector. The signal can loop through the
(such as another projector). Inputs are 75
)HDWXUHV
¡
accepts a variety of digital HDTV 4:2:2 component signals (YCbCr), and de-
serializes into a parallel 20-bit 4:2:2 component signal (10 bits each for Y
and CbCr)
¡
SMPTE 292M compatible
¡
Two data rates: 1.485 Gb/sec or 1.485/1.001 Gb/sec.
¡
provides both a
¡
includes 4 status LEDs
8VHU·V 0DQXDO
“
Extended Display Identification Data (EDID
$
6(5,$/ ,1
6(5,$/ 287
and a
6(5,$/ 287
BNC out to another device
terminated.
BNC connector
•
)
,1387
, where it
6(5,$/ ,1
BNC
Advertisement
