Advertisement
&RPSRVLWH 69LGHR
,QSXW 0RGXOH
[[
3& $QDORJ
,QSXW 0RGXOH
[[
The Composite/S-Video Input Module may be installed in this projector, a Marquee
Signal Switcher or a Marquee Case/Power Supply. The module receives either
composite video or S-video input signals from tape or disk players (do not connect
both types of signals simultaneously). Video inputs are 75
outputs are provided for buffered loop-through to another display device.
&RPSRVLWH6YLGHR )HDWXUHV
¡
BNC connectors for composite RGB signals
¡
4-pin mini-DIN connectors for S-Video signals
¡
buffered loop-through video outputs
NOTES: 1) This interface is not a decoder. NTSC, PAL, or SECAM signals must
connect to the video decoder installed at
are not functional. 3) For use with this projector, do not connect both composite
video and S-video signals to the Composite / S-Video Input Module–connect one or
the other, even when plugged into a switcher.
The PC250 Analog Input Module may be installed in this projector, a Marquee
Signal Switcher or a Marquee Case/Power Supply. The module receives analog RGB
input signals from IBM PC compatibles or Macintosh computers. Video inputs are
$
75
terminated. Video outputs are provided for buffered loop-through to another
display device.
3& $QDORJ )HDWXUHV
¡
accepts VGA or MAC RGB video
¡
15 pin D connectors for video
¡
active loop-through video outputs
NOTES: 1) This interface does not accept VGA and MAC signals simultaneously. 2)
The audio connectors are not functional. 3) Trademarks are the rights of their
respective owners.
237,21$/ ,1387 02'8/(6
$
terminated. Video
,1387
,1387
/
. 2) The audio connectors
0LUDJH
8VHU·V 0DQXDO
)
Advertisement
