Download Print this page

Christie Mirage 2000 User Manual page 63

Hide thumbs Also See for Mirage 2000:

Advertisement

&RQWUDVW
&RQW
Press
6+257 &87
"Contrast" increases or decreases the perceived difference between light and dark
areas of your image (0-100). If contrast is set too high, the light parts of the image
lose detail and clarity. If set too low, the light areas will not be as bright as they could
be and the image will be dim. Start low and increase so that whites remain bright but
are not distorted or tinted, and that light areas do not become white (i.e., are
"crushed"). For best results, keep close to 50.
NOTE: If environment lighting changes, it may be necessary to re-adjust both
options.
%ULJKWQHVV
%ULJKW
Press
6+257 &87
"Brightness" increases or decreases the amount of black in the image (0-100). Start
high and decrease so that dark areas do not become black (i.e., are "crushed").
Conversely, high brightness changes black to dark gray, causing washed-out images.
For best results, keep close to 50.
&RORU
&RORU
Press
6+257 &87
"Color" adjusts color saturation level, or the amount of color in a video image. For
example, setting Color to "0" produces a black and white image. If Color is set too
high, the color levels in the picture will be over-powering and unrealistic. Use
or
until the desired color saturation level is displayed.
7LQW
7LQW
Press
6+257 &87
"Tint" adjusts color hue to obtain true color reproduction of NTSC video signals or
HDTV signals. Use
in your image. It is best to adjust tint while displaying an external test pattern—
otherwise, it is recommended that tint remain at its default setting.
'HWDLO
Press
6+257 &87
"Detail" adjusts the sharpness of the video image. Use
is as sharp as possible, keeping in mind that any level of detail above 3 (default) will
increase the level of detail as well as introduce some level of noise in the image. Set
below 3 to filter the signal and remove noise from a noisy source. Keep at 3 to apply
no detail.
and adjust the slidebar.)
an
d adjust the slidebar.)
an
d adjust the slidebar.)
an
d adjust the slidebar.)
or
until the you reach optimum balance of red-to-green
an
d adjust the slidebar.)
23(5$7,21
or
until the display
8VHU·V 0DQXDO
0LUDJH 


Advertisement

loading

This manual is also suitable for:

Mirage 5000