Advertisement
23(5$7,21
,PDJH 6HWWLQJV
0LUDJH
4. Adjust Filter to maximize the width of the good
5. Return Pixel Tracking to its correct setting from
6. Readjust Phase.
NOTE: "Filter" affects only the current signal.
+3RVLWLRQ
6+257 &87
This option moves image right or left.
NOTES: 1) The value shown represents where the approximate center of the image
lies in relation to the total number of pixels available horizontally. This varies widely
according to the signal—watch the image while adjusting. 2) Range of adjustment is
limited in 3D mode.
93RVLWLRQ
6+257 &87
This option moves the image up or down.
NOTES: 1) The value shown represents where the approximate center of the image
lies in relation to the total number of pixels available vertically. This varies widely
according to the signal—watch the image while adjusting. 2) Range of adjustment is
limited in 3D mode, and affects 3D performance. See 3.8, 3D Images for details.
%ODQNLQJ 7RS %RWWRP /HIW RU 5LJKW
This submenu blanks (turns to black) the top, bottom,
left, or right edge of the image so that any unwanted
information is cropped from view. For example, when
displaying native size video you may want to blank out
a few of the top lines.
Use any of the following slidebars,
pull-down lists or the checkbox to
alter your image. Refer to "Using
Slidebars and Other Controls"
(earlier in this section) if you need
help in selecting options and
adjustments. Changes made to the
Image Settings menu are applied
immediately and are saved when
you exit the menu (press
0HQX
).
8VHU·V 0DQXDO
area. See right.
Step 1.
3RVLWLRQ
Press
and adjust the top slidebar.)
3RVLWLRQ
Press
and adjust the bottom slidebar.)
([LW
or
)LJXUH ,PDJH 6HWWLQJ 0HQX
Advertisement
