Advertisement
2YHUYLHZ
3URMH.WRU
%DVL.V
425430398 0,9:708
This section explains how to use the projector once it has been installed. Please read
through these pages before using the projector for the first time. An understanding of
projector features and how to access them will help you to take full advantage of the
capabilities of the projector within minutes.
NOTE: Installation involves locating the projector and adjusting it for use at that
location. If you have not yet installed the projector, refer to Section 2, Installation
and Setup.
Most projector functions and adjustments are entered through keypad commands that
either control the projector directly or activate a system of intuitive menus. Variations
in settings can be defined and retained in the projector's internal memory as a custom
channel, with up to 99 different channels possible.
Components and functions are illustrated below.
)LJXUH %DVLF 3URMHFWRU &RPSRQHQWV
Accessed manually (or via the keypad if a motorized zoom lens is present),
=220
the lens barrel of a zoom lens (optional) rotates to adjust the size of the image
without moving the projector. Minimum and maximum image sizes depend on which
zoom lens is installed — see Section 5, Specifications.
6 H . W L R Q
2SHUDWLRQ
8VHU·V 0DQXDO
0LUDJH
Advertisement
