Advertisement
)ROGHG 2SWLFV
6RXU.H
&RQQH.WLRQV
In rear screen applications where space behind
the projector is limited, a mirror may be used
to fold the optical path. See right. The position
of the projector and mirror must be accurately
set—if considering this type of installation, call
your dealer for assistance.
The rear panel of the projector provides standard input panels to which you may
connect a variety of sources. See Figure 2.12–the lower left area (
accepts an RGB signal from an external RGB source, or it can also be used for YPbPr
signals or additional video sources. The upper right panel–the optional Video
Decoder Module–accepts only composite video at
devices such as VCRs, laser disk players or DVD players. There are also several
optional interfaces available for connecting other sources at
installs in the upper left area, just above
NOTE: For all connections, use only high-quality shielded cables.
,1387
)LJXUH 5HDU &RQQHFWRU 3DQHO
,167$//$7,21 6(783
,1387
or S-video at
,1387
Such an option
,1387
.
8VHU·V 0DQXDO
0LUDJH
) typically
from
,1387
Advertisement
