Advertisement
,167$//$7,21 $1' 6(783
5*% 6LJQDOV
<3E3U 6LJQDO
&20321(17 9,'(2
0LUDJH
provides 5 BNCs (connectors) for linking to a variety of sources, typically to
,1387
an RGB source such as VGA, SVGA, XGA, Mac, PowerMac, DEC, Sun, SGI and
others. This projector supports multiple sync types with RGB signals: sync-on-green,
composite sync, and separate H & V syncs.
NOTE: Depending on the source, you may need a custom adapter cable with BNC
connectors at the projector end and a different type of connector at the other (such as
a 15-pin "D" connector for computer sources). Contact your dealer.
Connect the
outputs to the
sync-on-green, only the red, green, and blue connections are required. If the source
provides a composite sync output, connect it to the
the source provides separate horizontal and vertical sync outputs, connect horizontal
sync to the
labeled
9(57
NOTES: 1) If for some reason the projector fails to recognize as an RGB signal,
specify this Color Space option within the Image Settings menu. See 3.6, Adjusting
the Image. 2) To connect YPbPr signals–such as from DVD or analog HDTV sources–to
,1387
, use the red, green and blue BNCs as described in YPbPr Signals later in this
section.
Connect a YPbPr signal (component video) to
8VHU·V 0DQXDO
BNC input(s) first. Then connect the red, green and blue source
6<1&
,
, and
5('
*5((1
%/8(
input labeled
6<1&
+25&203
See Figure 2.13.
)LJXUH &RQQHFWLQJ 5*% ,QSXW
BNCs on the
panel. If the source uses
,1387
input labeled
6<1&
and connect vertical sync to
,1387
as shown in Figure 2.14.
. If
+25&203
input
6<1&
Advertisement
