Advertisement
,167$//$7,21 6(783
69LGHR /RRS 7KURXJK
See Figure 2.18. From your source, connect an S-video source signal
&211(&7,216
to
using either the 4-pin mini DIN or the 2 adjacent BNCs labeled Y and C.
,1387
Connect a second cable from whichever
connector is free to one of the S-
,1387
video inputs of the next display device or projector. Continue this looping method for
each projector, using either 4-pin mini DIN or the 2 adjacent BNCs as input into
then using the other connector(s) as an output (i.e., loop through). Whether
,1387
you use 4-pin mini DIN or the 2 adjacent BNCs as input or output depends on the
type of cable you have on hand and what type of connectors are on each end.
9,'(2 7(50,1$7,21
In the Preferences menu, make sure "Video Termination" is
checked for only the final projector. All other projectors must have this option
unchecked in order for the signal to continue. For other types of display devices in
the chain, typically a "Hi-Z" switch position is needed.
)LJXUH &RQQHFWLRQV IRU 69LGHR /RRS 7KURXJK
8VHU·V 0DQXDO
0LUDJH
Advertisement
