Advertisement
and press
use the arrow keys to see the remainder of the menu. Items that are locked out or do
not pertain to the current action appear dimmed and cannot be selected.
NOTES: 1) If there is no signal present, all source-dependent adjustments are
disabled. 2) After 15 minutes of inactivity, the projector leaves the menu system and
returns to the presentation. 3) The Status menu is read-only.
When finished with a function menu, do one of the following:
If at any time you are uncertain what to do next, press
2QOLQH +HOS
information about the current menu or highlighted option. A scroll bar appears on the
right-hand side of a help window if there is additional text–use the arrow keys to
scroll. Press
From presentation level, press
within a topic. Press
At the bottom of some menus, a line of hint text also appears.
7LPHRXWV
Whenever the projector is not at presentation level, such as when there is a slidebar,
menu, message or test pattern displayed, you have limited time in which to make a
keypad entry before the projector returns to presentation level and the graphic
disappears. These time-outs vary depending on the current display, as shown in the
following chart:
(QWHU
at the desired option. Extra long menus have a scroll bar on the right–
N
Press
([LW
to return to the previous screen
N
Press
0HQX
to leave the menu system and return to the presentation
+HOS
again to exit.
([LW
to return to your presentation.
)LJXUH $FFHVVLQJ *HQHUDO +HOS 7RSLFV
+HOS
to access general Help Topics. Scroll as necessary
0LUDJH
23(5$7,21
+HOS
to display detailed
8VHU·V 0DQXDO
Advertisement
