Advertisement
23(5$7,21
0LUDJH
Accessed manually via 2 "tabs" on the lens (or via the keypad if a motorized
)2&86
lens mount is installed), focus adjusts the sharpness and clarity of the image at the
current throw distance.
/(16 2))6(7 ²
motorized lens is present), vertical and horizontal offsets shift the lens and move the
image up or down and left or right. See Section 2, Installation and Setup for the
offset ranges for any given lens. These are also listed on page 5-1.
6+877(5 RSWLRQDO
image to off. The shutter is controlled via a dedicated key on the keypad.
/$03 6,'( 3$1(/
module. NOTE: Lamp replacement requires a qualified service technician.
),/7(5 6,'( 3$1(/
&20326,7(69,'(2 ,1387 RSWLRQDO
signal from devices such as VCRs. Requires optional video decoder module.
5*% ,1387
as composite video, S-Video or YPbPr component signals.
56 6(5,$/ ,17(5)$&( :,7+ /223 7+528*+
be remotely controlled by a computer or controller, and provides a communications
connection for Christie's Marquee Signal Switchers.
56 6(5,$/ ,17(5)$&( :,7+ /223 7+528*+
be remotely controlled by an RS-422 compatible computer or controller (such as the
Two-Way Controller accessory). RS-422 communications can travel greater distances
than can RS-232 communications, but require RS-422 compatible equipment.
8VHU·V 0DQXDO
Accessed manually using the 2 front knobs (or via the keypad if a
Closing the shutter blocks the lens internally and turns the
For accessing the interior lamp door and replacing the lamp
Louvered grille for air intake. Remove to replace air filter.
Accepts RGB and sync signals from devices such as computers, as well
Accepts a composite video and S-Video
Allows one or more projectors to
Allows one or more projectors to
Advertisement
