Advertisement
(GLWLQJ D &KDQQHO 6HWXS
&+$11(/ (',7 ³ 67(3
&+$11(/ (',7 ³ 67(3
&+$11(/ (',7 ³ 67(3
to delete all channels, even those that are locked. In either case, the current channel
will remain but will be redefined from projector defaults.
NOTE: For any deletion, a confirmation box appears to make sure that you really
want to delete. Select "Cancel" (default) if you don't want to delete after all.
The basic setups that describe how and where a channel can be accessed are listed in
the Channel Setup menu. These channel setups can be edited at any time in the
Channel Edit submenu.
From the presentation level press
Channel Setup menu, press
(QWHU
and press
. The Channel Setup menu will appear.
To edit parameters shown in the Channel Setup menu, select the relevant channel and press
(QWHU
. The Channel Edit menu will appear similar to the sample shown in Figure 3.13.
)LJXUH &KDQQHO (GLW 0HQX
If desired, edit the following channel setups in the Channel Edit menu:
N
&+$11(/ 1$0(
here. Channel names can be up to 12 characters in length.
N
&+$11(/ 180%(5
here. NOTE: If you enter a channel number that already exists, a dialog
message appears indicating that this number is already in use–assign a
different channel number.
N
6:,7&+(5 180%(5
source is connected to a switcher, the default will be the lowest switcher
number available (from 1-9)–change here as desired.
N
,QSXW
1 (
6/27
current slot number (1-9) if the source is connected to a switcher.
N
If checked, all of the image settings for this channel are disabled.
/2&.('
If unchecked (default), all available image settings can be adjusted as
desired. You cannot use Auto Setup with a locked channel.
N
If checked (default, except for automatically defined channels
,1 0(18
with unchanged parameters), this defined channel will then appear in the
list available when
accessed via
0HQX
to display the main menu. To display the
, or move the highlight to the Channel Setup option
An alpha-numeric label can be defined and/or changed
A channel number from 01 to 99 can be changed
0" represents the projector itself. Or, if the input
´
,QSXW
,QSXW
), 2 (
), 3 (
), or 4 (
&KDQ
key is pressed. If unchecked, the channel must be
&KDQ
on the keypad or via the Auto Source function. NOTE:
23(5$7,21
6$03/(
,QSXW
) for projector inputs, or
8VHU·V 0DQXDO
0LUDJH
Advertisement
