Buell 2003XB9S Service Manual page 547

HOME
3. Connect cables to frame and starter.
a. See Figure 7-37.
starter using fastener with washer. Tighten fastener
to 60-85 in-lbs (7-10 Nm).
b. See Figure 7-36.
Tighten to 48-72 in-lbs (5.4-8.1 Nm).
4. Apply light coat of petroleum jelly or corrosion-retardant
material to both battery terminals.
7-32 2003 Buell XB9S: Electrical
First, connect positive cable to
Attach negative cable to frame.
8742
1
1. Fastener with washer
2. Positive battery cable
Figure 7-37. Positive Battery Cable
(Protective Boot Not Shown)
2