Buell 2003XB9S Service Manual page 246

HOME
8708
1. Ignition coil
2. Coil connection [83]
3. Cylinder head temperature sensor connection [90]
41. See Figure 3-60. Connect throttle cables to induction
module/throttle body.
42. Connect the following sensors:
a. Temperature sensor [90].
b. Oxygen sensor [137] (Install wire tire on harness).
43. See Figure 3-60. Install the ignition coil and spark plug
wires and connect [83]. Tighten ignition coil fasteners to
120-144 in-lbs (13.6-16.3 Nm).
2
1
4
Figure 3-60. Electrical Connections and Throttle Cables
5
3
4. Oxygen sensor connection [137]
5. Throttle cables
2003 Buell XB9S: Engine 3-43