Buell 2003XB9S Service Manual page 298

HOME
a0134x3x
ID
SERVICE WEAR LIMIT: 1.5672 in. (39.8069 mm)
Figure 3-144. Factory Outer Race Sizes
Table 3-29. Stamp Specifications
RACE ID
1.5646-1.5648 in.
(39.7408-39.7459 mm)
1.5648-1.5650 in.
(39.7459-39.7510 mm)
1.5650-1.5652 in.
(39.7510-39.7561 mm)
3. See Table 3-29. Outer races are identified at the factory
as shown.
Outer Race
Right Crank-
case Half
*Stamped
Class No.
CLASS STAMPED
NO. IDENTIFICATION*
1 1
2 2
3 3
NOTE
The different sizes of crankcase sets and flywheel assemblies
will not have separate part numbers. That is, a replacement
crankcase set may have a class 1, 2 or 3 pinion outer race.
Replacement flywheel assemblies will have either a class A
or B inner race.
a0133x3x
A - Roller OD cannot be
Figure 3-145. Bearing Identification
Table 3-30. Roller Specifications
ROLLER OD (*A)
Largest
Smallest
4. See Figure 3-145. Pinion bearings are identified as
shown.
2003 Buell XB9S: Engine
measured to required
accuracy with micrometer.
Refer to color chart in
Table 3-15.
IDENTIFICATION*
Red
Blue
White (Grey)
Green
3-95