Intake Cover Assembly - Buell 2003XB9S Service Manual

HOME

INTAKE COVER ASSEMBLY

REMOVAL
1. Remove seat. See 2.41 SEAT.
2. See Figure 2-108. Remove fasteners and nylon washers
(2).
3. Remove intake cover assembly (1).
INSTALLATION
1. Position intake cover assembly over top of airbox cover.
2. See Figure 2-108. Secure intake cover assembly (1) with
fasteners and nylon washers (2). Tighten to 12-36 in-lbs
(1-4 Nm).
NOTE
Front screws go in at a slight angle.
3. Install seat. See 2.41 SEAT.
2-82 2003 Buell XB9S: Chassis
b0981x2x
1
1. Intake cover assembly
2. Intake cover fasteners
Figure 2-108. Intake Cover Assembly
2.35
2