Buell 2003XB9S Service Manual page 220

HOME
8708
1. Ignition coil
2. Coil connection [83]
3. Cylinder head temperature sensor connection [90]
4. Oxygen sensor connection [137]
5. Throttle cables
15. See Figure 3-14. Connect throttle cables from induction
module/throttle body.
16. Connect the following sensors:
a. Temperature sensor (3) [90].
b. Oxygen sensor (4) [137].
17. See Figure 3-14. Install the ignition coil and connect (2)
[83] and tighten fasteners to 120-144 in-lbs (13.6-16.3
Nm).
2
1
4
Figure 3-14. Electrical Connections and Throttle Cables
5
3
2003 Buell XB9S: Engine 3-17