HOME
8769a
8767
Figure 3-50. Approximate Seven O'Clock Orientation of Oil Feed Line and Oil Return Line at the Oil Pump
25. See
Figure 3-50.
The feed oil line at the rear of the of the
oil pump should be torqued to 18-20 ft-lbs (24.4-27.1
Nm). When the oil line has been properly torqued, the
orientation of the line should be approximately 7 o'clock.
26. Also torque the return oil line at the top front oil pump fit-
ting to 18-20 ft-lbs (24.4-27.1 Nm). When the oil line has
been properly torqued, the orientation of the line should
also be approximately 7 o'clock.
3-36
2003 Buell XB9S: Engine
27. Torque the vent oil line at the gearcase cover to 120-132
in-lbs (13.6-14.9 Nm).
NOTE
When torquing the vent line, verify that the line does not twist
down towards the muffler, but remains horizontal and aligned
with the feed and return lines after torquing.